Steps For Connecting Your Radio To Your Wireless
Network
Step 1 - Power up the radio
First, connect to the AC Power. The radio can be switched on or off with the STANDBY/ON
button.
The display on the front of the radio will light up and indicate:
After a few seconds, this will change to show:
After a few seconds, this will change to show:
Step 2 - Scan for a wireless network connection
When the display shows < Scan for networks >, press the SELECT button.
(Note: if you make a mistake at any point, press the BACK button to go back to the
previous screen.)
The radio will now scan for all available wireless networks and will display:
Grace Wireless Internet Radio
Grace Digital Radio
Initializing
<
Scan for networks
Enter network
View Config
Edit Config
Network
Scanning
>
9