Front & Back Panel Connections; Steps For Connecting Your Radio To Your Wireless Network; Step 1 - Power Up The Radio - Grace Digital GDI-IR2600 User Manual

13
Front & back panel connections
The headset connection is on the front panel. Connect a headset or earphones to the jack to privately
listen to your audio. Alternatively, connect the headset jack to a stereo system's audio input jacks via the
provided cables. If the cables provided do not work with your type of connection(s) on your stereo
system, you may wish to contact your local electronics store to purchase the appropriate connector for
use with your stereo system.
There are 2 connections on the back panel
1) Power Adapter jack connection. Please plug the supplied power adapter into the radio's
power adapter jack then plug the other 2 prong end into the wall power outlet
2) AUX-in jack connection. The AUX-IN jack connection can be used to listen to audio from an
alternative device (not provided).
Steps for Connecting Your Radio to Your Wireless
Network
Getting Started

Step 1 - Power up the radio - 1

Connect one end of the AC Power cord to the back of your WI-FI INTERNET RADIO and the other end
to the available wall plug. The radio can be switched on or off with the STANDBY/ON button. The
STANDBY/On button is marked on your radio with this symbol
top of the display, the unit is in standby mode. Please turn the radio on before going to the next step.
CAUTION: Use only the power adapter supplied with WI-FI INTERNET RADIO. Connecting a power
supply with a different rating will cause permanent damage to WI-FI INTERNET RADIO and may be
hazardous and will void the warranty.
After you turn the radio on it will briefly display the following:
Grace Digital Radio
st
time set up
.
If only the clock is displayed on the