Alarms; Off Course Active Alarm; Enabling/Disabling Alarm; Man Overboard Alarm (Repeated) - Raymarine ST40 Owner's Handbook Manual

Chapter 1: Operation

1.4 Alarms

Off course active alarm

Man overboard alarm (repeated)

ST40

Enabling/disabling alarm

You can enable or disable the off course alarm function (i.e. switch it on
or off ) by selecting the Set off course alarm threshold screen (see
Normal operation) and holding down the
action).
Direction to steer
to MOB event
ST40
Bearing of MOB event from current position
The man overboard (MOB) alarm is initiated by other SeaTalk
instruments and will be displayed on the ST40 Compass instrument
only if the instrument is part of a SeaTalk system. The MOB alarm
cannot be cleared from the ST40 Compass instrument.
Heading error
STEER
COMPASS
Current heading
key for 3 seconds (toggle
Current distance
from MOB event
in either metres (M)
or yards (Y)
Bearing of MOB
event from current
position
COMPASS
5
D4773-2
D4776-2