Generac Power Systems Mobile Power MMG320 Specifications page 3

MMG320 Generac Specifications Continued:
 (2) 1000 CCA wet cell batteries
Battery disconnect switch
o
2A trickle battery charger
o
ENCLOSURE

Generac Mobile Power decals
 Aluminum, sound attenuated enclosure
UV & fade resistant, high temperature cured, white polyester powder paint
o
Insulated and baffled
o
68 dB(A) at 23 feet – prime power
o

Fully lockable enclosure including doors and fuel fill

Stainless steel hinges on doors
 Emergency stop switch located on outside of enclosure

Central lifting point
 Multi-lingual operating/safety decals

Document holder with operating manual including AC/DC wiring diagrams
TRAILER

DOT approved tail, side, brake, and directional lights
Recessed rear lights
o

Transportation tie downs

Safety chains with spring loaded safety hooks
 3" lunette ring hitch

(2) 8000 lb. axles with electric brakes
 15000 lb. tongue jack with footplate

ST215/75R17.5 tubeless tires – 16 ply
WEIGHTS & DIMENSIONS
Skid mounted

Dry weight: 8039 lbs (3646 kg)

Operating weight: 11499 lbs (5216 kg)

156 x 60 x 90 in
(3.96 x 1.52 x 2.29 m)
Trailer mounted

Dry weight: 10912 lbs
(4950 kg)
 Operating weight: 14372 lbs
(6519 kg)
 230 x 102 x 110 in
(5.84 x 2.59 x 2.79 m)
WARRANTY

Engine and generator covered under OEM warranty – consult factory for details.
CERTIFICATIONS

CSA certified
Manufactured by Magnum Power Products LLC., a wholly owned subsidiary of Generac Power Systems, Inc.
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
Page 3 of 4
4/12