Advertisement
Figure 1: 1029A's outer dimensions, with
the reference axis between the bass and
the treble drivers.
Figure 2: Type of cable needed if
unbalanced source is used (example
shown is RCA output to the XLR input)
listening position. This is due to the effect of
the DCW which increases the directivity. If
the ratio of direct sound to reflected sound
is greater the listener is then able to listen
to more of the material and less of the
room effects. Subjectively this is perceived as
superior stereo imaging.
Mounting options
The 1029A offers several mounting options:
On the base of the monitor is a 3/8" UNC
threaded hole which can accommodate a
standard microphone stand. On the rear
there is a provision for an Omnimount
50, bracket, the hardware required is two
M6x10mm screws. Alternatively, the speaker
can be hung on a wall in a vertical or horizon-
tal position by one of the three wall hanging
points.
A set of friction pads is also provided for
placing the 1029A on flat surfaces.
Maintenance
No user serviceable parts are to be found
within the amplifier unit. Any maintenance
or repair of the 1029A unit should only be
undertaken by qualified service personnel.
Table 1: Suggested tone control settings for differing acoustical environments
Figure 3: Control and connector layout on the rear panel of a 1029A.
Safety Considerations
, size
Although the 1029A has been designed in
®
accordance with international safety stand-
ards, to ensure safe operation and to main-
tain the instrument under safe operating con-
ditions, the following warnings and cautions
should be observed:
• Do not use this product with an unearthed
mains cable as this may compromise elec-
trical safety.
• Do not expose the loudspeaker to water
or moisture. Do not place any objects
filled with liquid, such as vases on the
loudspeaker or near it.
• This equipment is capable of producing
sound pressure levels in excess of 85 dB,
which may cause permanent hearing
damage.
• Free flow of air behind the loudspeaker is
necessary to maintain sufficient cooling.
Do not obstruct airflow around the loud-
speakers.
Guarantee
This product is guaranteed for a period of
ONE year against faults in materials or work-
manship. Refer to supplier for full sales and
guarantee terms.
Advertisement
