Hobie SPORT CRUISER 21 Assembly Manual page 5

2. INSTALLING CROSS BAR BOLTS
Applies to both front and rear cross bars
APPLY ANTI
PRIOR TO INSTALLING
(PREVENTS THREAD
DAMAGE)
SEIZE
FIGURE 3
If BOLTS FEEL LIKE YOUR FORCING THEM
TO THREAD, BACK THEM OUT AND CHASE
TAPPED HOLES WITH A 3/8" -16 TAP.
FORCING THREADING WILL DAMAGE THE
BOLT AND TAPPED HOLE THREADS.
-CAUTION-
3
(4" BOLTS
INSTALL IN
REAR BAR)
3/8" X 3/4" WASHERS
FROM RIG KIT
FRONT BAR -
STDB OUTBOARD
APPLY RTV SEALANT
AROUND HOLES PRIOR
TO INSTALLATION
STBD HULL - OUTBOARD