Using The Self-Timer/Burst Button - GE X2600 Power PRO Series User Manual

Using the Self-Timer/Burst Button

Use the self-timer when you want to be included in a picture,
or to ensure a steady Shutter button press. Place the camera
on a tripod or flat surface.
8
Press the Self-Timer/Burst
Button to cycle through
available modes.The current
mode appears at the bottom
of the LCD.
. Choose a Setting:
•0 seconds -
A picture is taken after a 0-second
delay (so you have time to get into the
scene).
•2 seconds -
A picture is taken after a 2-second delay
(for a steady, shutter release).
•2 shot -
The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds
later.
2. Compose the scene. Press the Shutter Button and press
halfway down (to focus). Continue pressing the Shutter
Button until it's completely down (to start the self-timer).
The Self-Timer light blinks until the picture is taken.