Connection To An Audio System - Sylvania DVR90VG Owner's Manual

• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
<REAR PANEL>
AUDIO OUT
Note
• Playing back a DVD using incorrect settings
may generate noise distortion and may also
damage the speakers.
16
EN
Connections

Connection to an Audio System

XXXX
Analog audio
input jacks
DVD/VCR
IN - AUDIO - OUT
L
R
or
DVD
AUDIO
OUT
L
R
Method 2
Dolby Digital decoder, MD
deck or DAT deck
Audio Coaxial Digital cable
(commercially available)
DIGITAL
AUDIO OUT
Setting
Connection
If output is Dolby Digital
encoded audio, connect to a
Dolby Digital decoder.
Unless connected to a Dolby
Digital decoder.
Connecting to an MD deck or
DAT deck.
* To complete these settings, refer to pages 71-7.
Note
• By connecting this unit to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
• The audio source on a disc in a Dolby Digital Multi-
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
Digital audio
COAXIAL
input jack
DVD
DIGITAL
AUDIO OUT
COAXIAL
Setup >Playback >Audio >Digital Out >
PCM Dolby Digital
- STREAM
PCM
-
PCM
-