Table of Contents
Advertisement
B
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 20.
4
Select the desired item.
or
DISPLAY menu
SETUP
DISPLAY
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE
OFF
Hint
PROGRESSIVE:
• You can set "PROGRESSIVE"
to "OFF" in the DISPLAY menu
or press and hold [PLAY B]
on the front of the unit for more
than 5 seconds during playback
until the PROGRESSIVE SCAN
indicator on the front panel
lights off.
• When "PROGRESSIVE"
is "ON", video signals from
the unit's VIDEO OUT and
S-VIDEO OUT jacks will be
distorted or not be output at all.
Hint
• In QUICK SETUP Menu,
"PLAYER MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. QUICK
SETUP Menu consists of the
setting menus frequently used,
and they are accompanied with
mark. You can make all
QUICK
settings in CUSTOM Menu.
C
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the "CUSTOM Menu" section on page 20.
4
Select the desired item.
or
AUDIO menu
SETUP
AUDIO
DRC
ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
Hint
• In QUICK SETUP Menu,
"PLAYER MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. QUICK
SETUP Menu consists of the
setting menus frequently used,
and they are accompanied with
mark. You can make all
QUICK
settings in CUSTOM Menu.
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See Hint on the right.
TV ASPECT
TV ASPECT
4:3 LETTER BOX
4:3 LETTER BOX
STILL MODE
AUTO
4:3 PAN & SCAN
PROGRESSIVE
OFF
16:9 WIDE
ENTER
STILL MODE:
(Default: AUTO)
See Hint on the right.
STILL MODE
TV ASPECT
4:3 LETTER BOX
AUTO
STILL MODE
AUTO
FIELD
PROGRESSIVE OFF
FRAME
ENTER
PROGRESSIVE:
QUICK
(Default: OFF)
See Hint on the left.
TV ASPECT
4:3 LETTER BOX
4:3 LETTER BOX
STILL MODE
AUTO
AUTO
PROGRESSIVE
OFF
ON
ENTER
If there is no picture
Before proceeding...
or you do not press
1. Make sure your TV has progressive scan.
2. Connect with component video cable
any buttons for 15
NOTE: If there is no picture or picture is
distorted after selecting 'YES',
wait about 15 seconds for auto recovery.
seconds, Progressive
A ct iva t e P ro gre ssi ve ?
scan will switch to
SELECT: K / L
"OFF" and it will exit
the setup menu.
Confirm again to use progressive scan.
If Picture is good, select 'YES'.
SELECT: K / L
5
DRC (Dynamic Range Control):
(Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
DOWN SAMPLING:
(Default: ON)
Set to "ON" when outputting in 48kHz.
Set to "OFF" when outputting the original sound.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
QUICK
DOLBY DIGITAL:
(Default: BITSTREAM)
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital Signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
– 21 –
Select the
desired
setting.
ENTER
or
Select the
desired
setting.
ENTER
or
SETUP
Select "Yes".
or
NO
YES
SET:ENTER
ENTER
Select "Yes".
or
NO
NO
YES
YES
SET:ENTER
OFF
ON
BITSTREAM
ON
OFF
BITSTREAM
ON
ON
PCM
6
To exit the TV ASPECT or
STILL MODE screen
SETUP
To complete the
PROGRESSIVE setting
ENTER
Hint
TV ASPECT:
• Select "4:3 LETTER BOX",
so that black bars may
appear on the top and
bottom of the screen.
• Select "4:3 PAN & SCAN"
for a full height picture with
both sides adjusted.
• Select "16:9 WIDE" if a
wide-screen TV is
connected to this unit.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", au-
tomatically select the best
resolution setting (FRAME
or FIELD) based on the
data characteristics of the
pictures. (default)
• If you select "FIELD", the
picture in the still mode will
be stabilized.
• If you select "FRAME", the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
"frame", which consists of
two separate images called
as "field".
• Some pictures may be
blurred if you select "AUTO"
in the still mode due to their
data characteristics.
6
To exit the menu
SETUP
Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing back a 96kHz
disc with the copyright
protection, or when Virtual
Surround is set to "1" or
"2", the sound will be down
sampled at 48kHz and
output as digital audio even
if the "DOWN SAMPLING"
is set to "OFF".
• This function is available
only on digital outputting of
a disc recorded in 96kHz.
EN
Advertisement
Table of Contents
