Common Washing Problems - White-Westinghouse WTR1240AS0 Owner's Manual

Tumble action washer
Table of Contents

Advertisement

Common Washing Problems
Marly washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage, For satisfactory
washing results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE
MEASURES
Blue stains
• Undiluted liquid detergent or fabric
• If caused by detergent, mix 1 cup (240 ml)
•Avoid overfilling detergent and fabric softener
softener dispensed directly onto
white vinegar with 1 quart (95 L) water in a
compartments of dispenser
fabric
plastic container Soak item 1 hour Rinse
• If caused by fabric softener, rub stains with
bar soap Wash
Discoloration,
• Not enough detergent
• Rewash with correct amount of detergent
• Sort items by soil level and color
graying
• Wash water temperature too low
and hottest water safe for fabric Add
• Use correct amount of detergent, hottest
• Incorrect sorting
bleach safe for fabric
water and bleach safe for fabric
Greasy, oily stains
• Not enough detergent
• Treat with prewash stain remover or liquid
• Use correct arnount of detergent and hottest
• Undiluted liquid fabric softener
detergent
water safe for fabric
poured directly on fabric
.Increase detergent and water temperature
• DO not pour liquid fabric softener directly
Rewash
on fabric. See Washing Procedures for
• Rub fabric softener stains with bar soap
directions on adding softener
Holes, tears, or
• Incorrect use of chlorine bleach
• May be irreversible if rips, tears and seams
• Never pour chlorine bleach directly on fabric
snags
• Unfastened zippers, hooks, buckles
cannot be mended
• Check condition of items before washing See
• Rips, tears and broken threads
Washing Procedures for prepanng and
• Overloading the washer
loading the wash load and adding chlorine
• Degradation of fabric
bleach
Lint
• Incorrect sorting
• Reduce load size Rewash using correct
• See Washing Procedures for sorting and
• Tissues left in pocket
water temperature, water level, and
prepaBng the wash load
• Overloading the washer
amount of detergent
• Do not overload washer
• Not enough detergent
• Add nonprecipitating
water conditioner to
• Use correct temperature and amount of
• Undissolved detergent has left a
wash water to remove detergent residue
detergent, water and wash time
residue resembling lint
• Add liquid fabric softener to final rinse
• Static cling is attracting lint
• Dry load in dryer
• Load washed too long
• Remove lint with lint brush or roller
Pilling
(Fibers break off, ball
up and clirlg to
fabric)
• Pilling is normal with synthetic and
permanent press fabrics This is due
to abrasion from normal wear
• Use a lint brush or shaver to remove pills
• Use fabric softener in the washer to lubbcate
fibers
• When ironing, use spray starch or fabdc finish
on collars and cuffs
• Turn items inside out to reduce abrasion
Residue or powder
on dark items;
Stiff, harsh fabrics.
Wrinkling
Yellow
buildup
of
body soil on
synthetic
fabrics
• Undissolved detergent
•Some nonphosphate granular
detergents carl combine with hard
water minerals to form a residue
• Overloading the washer
.Rewashload
•Increase water temperature using hottest
water safe for fabric
• Do not overload washer
• Use liquid detergent or use nonprecipitating
water conditioner with nonphosphate
granular detergent
•Overloading the washer
• Incorrect wash cycle for wash load
•Reduce load size
•Rinse in cold water with liquid fabric
softener using the Perm Press or Delicate
cycle
•Agitation time too short
• Wash water temperature too low
• Not enough detergent
• Soak in detergent booster or product
containing enzymes
• Wash in hot water (120'T/49
C) using full
permanent press cycle. Increase detergent
Add bleach safe for fabric
• Or, treat with color remover
•Do not overload washer
•Remove items from washer as soon as cycle is
completed,
• Use liquid fabric softener
• Select correct wash cycle
• Use correct amount of detergent
• Wash synthetics frequently using hot or warm
water
Yellow
or brown
rust stains
•Iron or rnanganese in water supply,
water pipes, or water heater
•To restore discolored load of whites, use
rust remover safe for fabric
• DO not use chlorine bleach to remove
rust stains, It may intensify
discoloration.
•Use nonprecipitating
water softener
• Before washing, run hot water for a few
minutes to clear lines
• Drain water heater occasionally
• For an ongoing problem, install an iron filter in
your water supply system

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wtr1240aq0

Table of Contents