Advertisement
Storage Bin
5
• Fit a storage bin to the grooves on each side of the keyboard.
Note: The storage bins are designed to fit one way.
• Insert two #8 x
/
" (1.9 cm) screws into each storage bin
3
4
and tighten.
Clock
6
• Turn the assembly upright.
• "Snap" the clock into the slots in the top side of the assembly.
As s em bl y
Storage Bin
7
• Fit the pegs on the desktop into the slots in the top side of
the assembly.
Retainer
8
• Fit a retainer over each desktop peg.
• Insert two #6 x
and tighten.
• Lift and lower the desktop.
6 6
Desktop
Pegs
/
" (1.3 cm) screws into each retainer
1
2
Retainer
Advertisement
