Advertisement
Keyboard
1
• Place the keyboard face down on a flat surface.
• Fit the legs into the half circle indents in the keyboard.
Note: The legs are designed to fit one way.
• Insert three #8 x
3
/
" (1.9 cm) washerhead screws into each leg
4
and tighten.
2
• Position the shelf, as shown.
• Fit the ends of the shelf into the slots in legs.
As s em bl y
Legs
Shelf
Slots
3
• Insert two #8 x
3
/
" (1.9 cm) washerhead screws into each end
4
of the shelf and tighten.
4
• Fit a foot onto each leg.
Note: The feet are designed to fit one way.
• Insert three #8 x
3
/
" (1.9 cm) screws into each foot and tighten.
4
5 5
Feet
Advertisement
