Alert Buzzer - Pioneer DRM-7000 Operating Instructions Manual

When Free Message is set to OFF, the following message appears:
F r e e m e s s a g e
i s p r o h i b i t e d
If the host computer is not sending commands while the Free Message mode
is ON, messages from the Changer appear on the LCD display.

5.2.3.4 Alert Buzzer

The DRM-7000 provides a buzzer on the control panel to indicate status and
errors. The buzzer sounds at the following times:
• When the rear door is opened
Since it is difficult to monitor progress using the LCD display while working
at the back of the Changer, the buzzer indicates that work is continuing
without errors.
• If a disabled button on the Changer's Control Panel is pressed
Because the buzzer sounds when the operator attempts to input a
command, the buzzer cannot be turned OFF.
• When an error occurs with the Changer
The buzzer continues to sound until a button is pressed on the control
panel.
To turn off the Alert Buzzer function, follow the steps below.
A l e r t b u z z e r ?
Press the Enter button
A l e r t b u z z e r i s
set to ON / OFF
Press the right arrow button
A l e r t b u z z e r i s
set to ON / OFF
Press the Enter button
A l e r t b u z z e r
i s p r o h i b i t e d
DRM-7000
- 27 -
Operating Instructions