Installation; Positioning The Changer - Pioneer DRM-7000 Operating Instructions Manual

4.0

Installation

4.1

Positioning the Changer

The instructions below lead through the physical installation of the DRM-7000.
1. Attach the placement fixtures
To stabilize the Changer further, attach the placement fixtures at the corners of the unit
2. Select the installation location for the Changer
DRM-7000
• Always be sure to attach the
placement fixtures first
• Verify that the placement fixtures
are protecting the ports and cables
on the back of the unit
Please note that any damage caused
to the rear ports or cables as a result
of failing to install the fixtures, voids
the warranty for that damage.
• The back of the Changer should
be at least 50 centimeters
(approximately 20 inches) from the
wall
• The back access panel must be
able to fully open in order to add or
remove individual disc magazines
or drives
- 10 -
Operating Instructions