Table of Contents
Advertisement
Overviewof cable types
Cables
can be purchased
from most
stores
that sell
audio/video
devices.
Before purchasing
any cables,
be
sure of connector
types
required
by your devices
and
the length
of each cable.
Coaxial cable (F-type)
Coaxial
(F-type)
cable is used
for connecting
your
antenna,
cable TV service,
and/or
cable converter
box
to the ANT/CABLE
input
on your
TV.
Standard A/V cables (red/white/yellow)
Standard
A/V
cables
(composite
video)
usually
come
in sets of three and are for use with video
devices
with
analog
audio
and composite
video
output.
These cables
(and the related
inputs
on your TV) are typically
color-
coded
according
to use: yellow
for video,
red for stereo
right
audio,
and white
for stereo left (or mono)
audio.
Component video cables (red/green/blue)
Component
video
cables come in sets of three and are
for use with video
devices
with component
video
output.
(ColorStream
®is Toshiba's
brand
of component
video.)
These cables
are typically
color-coded
red,
green,
and blue. Separate
audio
cables
are required
for
a complete
connection.
Note: Component
video cables provide better picture
performance
than a standard (composite)
video or S-video
cable.
HDMI ® cable (with HDMI Logo"Jb_rrl|")
HDMI
(High-Definition
Multimedia
Interface)
cable is
for use with
devices
with
an HDMI
output.
An HDMI
cable delivers
digital
audio
and video
in its native
format.
This cable carries both
video
and audio
information;
therefore,
separate
audio
cables
are not
required
for a complete
HDMI
device
connection
(_
pages
17-20).
Note: An HDMI cable provides
the best audio and picture
performance.
Dual-wandIR blaster cable
Dual-wand
IR blaster
cable is for use with video
devices
with IR (infrared)
remote
control.
This cable can be used
with
the TV's IR pass-through
feature
(_
page
16).
To obtain IR blaster
cable:
J
Visit http://ceaccessories.toshiba.com/
Optical audio cable
Optical
audio
cable is for connecting
receivers
with
Dolby
Digital
or PCM (pulse-code
modulation)
optical
audio
input
to the TV's DIGITAL AUDIO OUT terminal
(_
page
19).
AnalogRGB(15-pin) computercable
Analog
RGB (15-pin)
computer
cable is for connecting
a
PC to the TV's PC IN terminal
(_
page 20).
Note: Separate audio cables are required for a complete
connection.
Standard/Crossover L ANcable
Standard
LAN cable is used
to connect
the TV to your
home
network
(_'
pages
21-22).
Crossover
LAN cable is used to connect
the TV to
directly
to a PC (_'
page 21).
Aboutthe connectionillustrations
You can connect
different
types and brands
of devices
to your TV in several
different
configurations.
The
connection
illustrations
in this manual
are
representative
of typical
device
connections
only. The
input/output
tel_ninals
on your devices
may differ
from
those illustrated
herein.
For details
on connecting
and using
your specific
devices,
refer to each device's
owner's
manual.
13
- Quick Links:
- Tv Back Panel
Hide quick links:
Advertisement
Table of Contents
