Connecting Your Tv; Side Connections; Back Connections; Connecting Hdmi Or Dvi Devices - Toshiba 40CV600E Owner's Manual

Side connections

You can connect a wide variety of auxiliary
equipment via the terminals located on the right
side of the panel o (2).
Please always refer to the owner's manual of the
equipment to be connected for full details.
Connection example
TV right side view
Camcorder
Video Games
• To select the side inputs, press o until the
video input mode list appears on the screen,
then press or
then press Q.
• Before connecting any external equipment, turn
off all main power switches.
• If you connect both of the S-VIDEO input
terminal and VIDEO input terminal, the
S-VIDEO signal will appear on the screen
(display changes to o 2S).
• If you connect mono sound equipment to
o (2), connect the audio output of the
equipment to the L/MONO jack on the TV.
• You can enjoy Video Games with this TV.
However shooting games, where the player
shoots at a target on the TV screen with a light
gun, may not work because of the LCD Colour
TV properties.

Connecting your TV

Camcorder with
S-Video
to select o2 (- page 23),

Back connections

Connection example
or
DVD video player
(with component
video outputs)
TV back view
3 PC/HDMI 1 RGB/PC
( AUDIO )
COMPONENT
VIDEO INPUT
Y
P B /C B
1 MONITOR
VIDEO
P /C
R R
L/MONO
AUDIO
R
• Before connecting any external equipment, turn
off all main power switches.
• The unauthorized recording of television
programmes, DVDs, video tapes and other
materials may infringe upon the provisions of
copyright law.
• The COMPONENT VIDEO INPUT consists of
three component video signals (Y, P
C ) and provides the best picture performance.
R
These terminals can only be used with the
component video compatible equipment e.g.
DVD video player, etc.
• Additional equipment and cables shown are not
supplied with this TV.

Connecting HDMI or DVI devices

• When turning on your electronic components,
turn on the TV fi rst, and then the HDMI and DVI
device.
• When turning off your electronic components,
turn off the HDMI and DVI device fi rst, and then
the TV.
• This TV may not be compatible with features
and/or specifi cations that may be added in the
future.
• This TV is only operable with L-PCM on
32/44.1/48 kHz and 16/20/24 bits. If there is
no sound when using HDMI, use the analogue
audio cables to connect the TV and the HDMI
device, and select Analogue in HDMI1 audio
of the AV connection menu.
Set Top Box
VCR (Normal)
VCR
(Recording)
/C
B B
, P /
R
27