Power Wheels CADILLAC ESCALADE CUSTOM EDITION N8417 Owner's Manual page 15

21
DASH VIEW
" screws into the sides of the
• Insert two #8 x 3 /
4
windshield/dash. Tighten the screws.
• Close the doors on the vehicle.
IMPORTANT! Turn the vehicle on its side or over to complete
assembly steps 23-28.
Steering
Column
22
BOTTOM VIEW
• Wipe the steering column with a paper towel to remove any
excess lubricant.
• First, insert the straight end of the steering column down
through the hole in the metal bar
B
the vehicle floor ; and finally, out through the hole in
the dash.
N8417pr-0920
ASSEMBLY
Dash
A
B
Metal
Vehicle
Bar Hole
Hole
A
; then through the hole in
Steering
Rod
23
• Insert the curved end of the steering column through the hole
in the steering rod.
Large Opening
Steering Wheel
24
DASH VIEW
• Position the steering wheel so that the large opening is UP.
• Fit the steering wheel onto the steering column.
Steering
Column
Steering Column
15
F