Setting The Hdmi - Toshiba TheaterWide 27HL85 Owner's Manual

Using the AUTO ASPECT feature
When the AUTO ASPECT feature is set to on and the TV receives a
480i signal, the picture size is automatically selected (as described in
the following table).
4:3 Normal Natural
16:9 Full Full
4:3 Letter box TheaterWide 2
Not defined (no ID-1 data)* User-set mode
*If the signal does not inch*de aspect information, the picture size you
selected on pages 29-30 is displayed.
To turn on the AUTO ASPECT feature:
1. Press MENU, and then press • or • until the FUNCTION
menu appears.
SIDE PANEL
2. Press • or • to highlight AUTO ASPECT.
Note:
The AUTO ASPECT feature is available for
additional formats when viewing HDMI
sources because AUTO ASPECToperates
based on information found in the digital
HDMI signal (not ID- lsignal_.
MENU
3. Press • or • to select ON.
Setting the HDMI audio mode
1. Press MENU, and then press • or • until the SET UP menu
appears.
2. Press • or • to highlight HDMI AUDIO.
3. Press • or • to select HDMI audio mode from AUTO,
DIGITAL, or ANALOG (AUTO is recommended). See
"Connecting an HDMI rMor a DVI device to the HDMI input"
on page 15.
PICTURE POSITION
32