Connecting A Cable Converter Box; Connecting A Cable Converter Box And A Vcr - Toshiba CZ36V61 Owner's Manual

Connecting a cable converter box
This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-I so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. You should keep your TV
selected to ANT-1 so that you can use the TV's features. When
viewing premium channels or recording with the VCR, select ANT-2
and change the TV channel to 3 or 4 (whichever channel is vacant in
your area), then use the converter box to change channels.
You will need:
• three coaxial cables
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
Note:
When you use a converter box with your TV,,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels
TV
VCR
ii¸ _ _ ! _ •
Caution:
If you want to record one channel while
watching another channel, a splitter Cnot
included) must be added between the cable
and ANT- I. One output of the splitter goes to
ANT 1 and the second output is connected to
IN on the cable converter box
ff you have a mono VCF_connect L/Mono to
VCR Audio OUT using on_/ one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable• Do
not connect the video cable and the
S video cable to Video I simultaneousl_
When you use a converter box with your T_,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocklhg channels, and
programming your favorite channels•