Table of Contents
Advertisement
Normal Recording
Preparation:
• Turn on the power of both the DVDNCR
Receiver and TV.
• Tune the TV to the DVD/VCR Receiver output channel (OH 3
or 4) or set the TV's source selector to VIDEO.
• If a direct VIDEO/AUDIO
connection
is made between the
DVD/VCR
Receiver and the TV, set the TV's source selector
to VIDEO.
I I _J_I_
I_'_
I__J
Insert a video cassette with the safety tab intact.
Select the desired channel with CH/TRK _
or
number (0-9) buttons.
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINEI(L1)
or LINE2(L2) with INPUT.
Set the desired recording speed (SP or SLP)
with the SP/SLP button.
Set the MTS mode as desired (See page 18, 28).
Press
REC/ITR
(O) once.
Recording
will start.
(The
REC indicator
will light in
the display
window.)
• REC indicator appears only when the Output Source is
set to VCR.
• If a cassette with no safety tab is loaded, the cassette
will be ejected automatically.
Press STOP
to stop recording.
If the tape reaches the end before STOP is pressed, the
DVDNCR
Receiver will automatically
stop, rewind, eject
the tape and turn itself off.
To pause recording
1 Press PAUSE/STEP
to pause
the tape
during
recording.
The REC indicator will flash in the display window.
2 When
you want to continue
recording,
press
PAUSE/STEP
or REC/ITR
(O).
• After 5 minutes in Pause mode, the tape will be stopped
automatically
to protect the tape and the video heads.
To record one TV program
while
watching
another
1 Use TV/VCR
to select
the TV mode
during
recording.
"TV" appears in the display window.
2
Using the TV, select
the channel
to be viewed.
@ips
Always use PAUSE/STEP for best results when making
changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP to put the unit in pause mode. Select the desired
channel on the DVD/VCR Receiver, then press PAUSE/STEP
again to resume recording.
Timer Recording
This DVD/VCR Receiver can be programmed to record
up to 8 programs within a period of 1 year. For unattend-
ed recording, the timer needs to know the channels to be
recorded and the starting and ending times.
• If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
• Make sure a tape is in the DVD/VCR Receiver and the
safety tab is in place or the tape will be automatically
ejected.
Preparation:
• Turn on the power of both the DVDNCR
Receiver and the
TV.
• Be sure the TV is set to the DVD/VCR Receiver output channel
(OH3 or OH4).
• Make sure the TUNING BAND in the TUNING menu is set
appropriately
(TV or CATV).
Press
MENU
and the MAIN
menu will appear.
Use _
to choose the PROGRAM menu.
Press
ENTER
to go to the PROGRAM
menu.
The PROGRAM
menu
will appear.
• If alI 8 programs have been entered, FULLY
PROGRAMMED
message will appear for a moment
and then PROGRAM
1 wili appear on the TV screen.
[] cLocK
]
m
PROGRAM
Use _/1_ to choose the PROGRAM No. (1-8).
Use • to choose the MONTH option.
Use _1/1_to choose the desired month.
Use • to choose the DAY option.
Use _1/1_to choose the desired day.
Use • to choose the START option.
Use _1/1_to choose the desired start time.
Use • to choose the STOP option.
Use _1/1_to choose the desired stop time.
Use • to choose the CHANNEL option.
Use _1/1_to choose the desired channel
(Channel, LINEI(L1)
or LINE2(L2)).
Cable Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD/VCR Receiver
(page 11), using a cable box converter, you must set the
channel in this step to match the cable box output channel
(usually CH 3 or 4). Change channels on the cable box
instead of with the DVDNCR Receiver.
Advertisement
Table of Contents
Troubleshooting
