Table of Contents
Advertisement
the Display
The display requires a stable, level, and clean surface near a power outlet,
10 cm (4") away from
walls or other large objects. The rear ventilation
grid should be unobstructed,
and the display
should not be exposed to water or heat. Before setting
up the display, prepare such a space.
To set up the display:
1.
Remove the protective
plastic bag and plastic screen protector
from
the display.
2.
Remove the power cord from the accessories box, insert the
appropriate
end into the power (AC IN) connector
on the bottom
of
the display, and then insert the other end into a free power outlet.
3.
Turn on the power switch on the bottom
of the display.
Connecting
to a TV Signal
Source
A TV signal may come from a cable box, satellite
receiver,
antenna,
or similar
device.
To connect a TV signal source to the display:
1.
Remove the coax-to-RCA adapter
from the Accessories Box
and insert it into the antenna
(ANT) jack on the bottom
of
the display.
2.
Connect a coax cable between the adapter and TV signal
source (for example, a cable box, satellite
receiver
Note:
If you would
like to be able to record
the TV signal with a VCR, DVD
recorder, or similar device, connect
the TV signal source to the input of
the recording
device with one cable,
then connect the output
of the
recording
device to the ANT jack on
the display with another
cable.
or antenna).
Advertisement
Table of Contents
