Listings And Code Approvals; Description Of The Fireplace System - Heatilator E36 Installation & Operating Instructions Manual

Woodburning fireplace
Table of Contents

Advertisement

This fireplace system has been tested and listed in
accordance with UL 127 and ULC-S610 standards, and
has been listed by Underwriters Laboratories Inc. for
installation and operation in the United States and Canada
as described in this manual.
This fireplace has been tested and listed for use with the
optional components listed on page 5. These optional
components may be purchased separately and installed
at a later date. However, installation of an outside air kit
will require significant reconstruction, and should be
installed at the time of the initial fireplace installation.
This fireplace and its components are designed to be installed and operated as a system. Any alteration to or
substitution for items in this system, unless allowed by these installation instructions, will void the Underwrit-
ers Laboratories listing and may void the product warranty. It may also create a hazardous installation. Read
through these instructions thoroughly before starting your installation and follow them carefully throughout
your project.
B. DESCRIPTION OF THE FIREPLACE SYSTEM
1.
The Heatilator fireplace system consists of the following:
a.
Fireplace/Integral Grate
b.
Refractory
c.
Chimney Termination Cap
d.
Chimney System
e.
Hearth Extension
2.
Optional Components Include:
a.
Glass Doors
b.
Chimney Air Kit
c.
Outside Combustion Air System
Note:
Illustrations used throughout these instructions
reflect "typical installations" and are for design purposes
only. Actual installation may vary slightly due to individual
design preferences. However, minimum and maximum
clearances must be maintained at all times.
The illustrations and diagrams used throughout these
installation instructions are not drawn to scale.
4
A. LISTINGS AND CODE APPROVALS
17335 Rev L
E36/39/42 INSTALLATION INSTRUCTIONS
Check with your local building code agency prior to installing
this fireplace to ensure compliance with local codes,
including the need for permits and follow-up inspections. If
you need assistance during installation, please contact your
local dealer or the Heatilator Technical Services
Department, Hearth & Home Technologies Inc., 1915 W.
Saunders St., Mt. Pleasant, Iowa 52641 (1-800-927-6841).
Heatilator® is a registered trademark of Hearth & Home
Technologies Inc.
WARNING!
Figure 1 - Typical Fireplace System
07/04

Advertisement

Table of Contents
loading

This manual is also suitable for:

E39E42

Table of Contents