Table of Contents
Advertisement
Assembly
Elastic
Loop
21
• Fit the bottom edge of the pad around the bottom edge
of the seat.
• Hook the elastic loops on each side of the pad to the peg
on the back of the accessory bins.
22
• Position the lights 'n sounds tray on a flat surface, with the
roller facing you.
• Position the mirror base, with the scooped area toward you.
• Fit the four mirror base pegs into the four holes in the
lights 'n sounds tray.
Elastic
Loop
23
• Turn the assembly over. Insert four
Assembly is now complete.
Mirror Base
Lights 'n
Sounds Tray
9
9
#8 x 1
/
" screws into the bottom of the lights 'n sounds tray
3
8
and tighten.
/
3
#8 x 1
" Screw - 4
8
Shown Actual Size
Advertisement
Table of Contents
