Fisher-Price DELUXE SMART RESPONSE 79644 User Manual page 5

Assembly
5
• Pull both rear legs out until they "snap" into place.
6
Front
Base
• Place the rear base on a flat surface so that the buttons
face the front base.
• While pressing the buttons on each side of the rear base,
fit the rear legs onto the rear base. Push the rear legs down
until the buttons on the rear base "snap" into the holes
in each rear leg.
Pull
Rear
Pull
Leg
Rear
Leg
Rear
Legs
Press
Button
Press
Button
Rear Base
7
• While standing on the rear base, pull the rear legs up. They
should remain secured to the rear base. If you can remove
the rear legs, you have not assembled them correctly to the
rear base. Reread and repeat assembly step 6.
• Set the frame assembly aside for Assembly step 17.
Ridges
8
Top of Seat
• Position the seat face down, with
the top of the seat facing you.
• Position a seat tube so that the long end is upright and
toward you and the curved end is toward the outside edge
of the seat.
• Insert the curved end of the seat tube through the holes in
the ridges on the seat back.
• Repeat this procedure to assemble the other seat tube to
the seat.
5
Pull Up
Pull Up
Rear Legs
Rear Base
Seat Tube
Long Ends
Curved
End