Meridian MSR + User Manual page 9

• Enter one of the following codes using the numeric keypad to
indicate the type of product you want to control.
The indicator should flash once each time you press a key, and then
flash twice and stay off when you have entered the code correctly:
Product type Code Product type
TV 1000 SAT/CABLE
VCR 2000 LD
TAPE/MD/CD-R 4000 DVD
CD 5000 GAME
For example, for a TV enter 1000.
• Point the MSR+ at the product you want to control, hold down
Function, and press OFF.
Each time you press Function OFF the MSR+ will step to the next
device in the library and send the corresponding Power off code to
the other product.
• As soon as the other product turns off, indicating that this is the
correct device, press the same source key again (eg TV) to store the
currently selected device.
• To step back through the device library if you overshoot press
Mute on the MSR+.
The indicator will flash twice to indicate that the operation has
succeeded, and the MSR+ is now ready to control your other
product.
Code
6000
Problems when programming automatically
7000
If you reach the end of the device library without finding one that
8000
switches off your product the indicator will flash six times.
9000
• Press the source key again to resume the search from the beginning.
If the other product does not turn off, your product may not be
supported by the device library. In this case you will need to
program the MSR+ using your product's own remote control as
described in Learning commands , page 8.
Note: When stepping through the device library, you can use
the keys other than Function OFF on the MSR+ to test other
commands in the currently selected device.
P r o g r a m m i n g
7