Assembly Instructions - Central Pneumatic 93351 Assembly And Operating Instructions Manual

2.5 hp air compressor 29 gallon capacity
Table of Contents

Advertisement

When unpacking, check to make sure all the parts shown on the Parts List on page 17
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
CAUTION! Always make sure the ON/OFF Switch (86) of the Air
Compressor is in its "OFF" position and the unit is unplugged from its electrical
outlet prior to assembling the Compressor or making adjustments to the unit.
To Attach The Handle And Wheels:
1.
To attach the Handle (50A) to the Tank (50) of the Air Compressor, align the two
mounting holes in the Handle with the two mounting holes in the Tank. Secure
the Handle to the Tank, using the two Lock Knobs (50B). (See Figure E.)
2.
To Attach the two Wheels (53) to the Tank (50) of the Air Compressor, insert a
Wheel (53) on each end of an Axle (53A). Secure the Wheels to the Axles, using
two Retaining Rings (54), then two Bolts (93). (See Figure E.)
FIGURE E
LOCK KNOB (50B)
AXLE (53A)
BOLT (93)
RETAINING RING (54)
For technical questions, please call 1-800-444-3353.
SKU 93351
UNPACKING

ASSEMBLY INSTRUCTIONS

WHEEL (53)
HANDLE (50A)
LOCK KNOB (50B)
AXLE (53A)
WHEEL (53)
BOLT (93)
RETAINING RING (54)
REV 05/06
Page 10

Advertisement

Table of Contents
loading

Table of Contents