CHICAGO 4095 Assembly And Operating Instructions Manual page 4

15. Use safety equipment. Always wear eye protection. Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
Use clamps (not included) or other practical ways to secure and support the
16.
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control.
Do not force the tool. Use the correct tool for your application. The correct
17.
tool will do the job better and safer at the rate for which it is designed.
Do not use the power tool if the Trigger does not turn it on or off. Any tool that
18.
cannot be controlled with the Trigger is dangerous and must be replaced.
Disconnect the Power Cord Plug from the power source before making any
19.
adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons. Tools
20.
are dangerous in the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean. Properly
21.
maintained tools with a sharp cutting edge are less likely to bind and are easier
to control. Do not use a damaged tool. Tag damaged tools "Do not use" until
repaired.
22. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly maintained
tools.
Use only accessories that are recommended by the manufacturer for your
23.
model. Accessories that may be suitable for one tool may become hazardous when
used on another tool.
Tool service must be performed only by qualified repair personnel. Service
24.
or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
25.
in the "Inspection, Maintenance, And Cleaning" section of this manual. Use
of unauthorized parts or failure to follow maintenance instructions may create a risk
of electric shock or injury.
For technical questions, please call 1-800-444-3353.
SKU 4095
TOOL USE AND CARE
SERVICE
PAGE 4