Product Specifications; General Safety Rules; Work Area; Electrical Safety - CHICAGO 4095 Assembly And Operating Instructions Manual

Electrical Requirements 120 Volt / 60 Hz / 4.5 Amps
Variable Speed
Blade Stroke
Shoe Plate Tilt
Chuck
Chuck Capacity
Overall Dimensions
Weight
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assem-
bly diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
Keep your work area clean and well lit. Cluttered benches and dark areas invite
1.
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Grounded tools must be plugged into an outlet properly installed and grounded
4.
in accordance with all codes and ordinances. Never remove the grounding
For technical questions, please call 1-800-444-3353.
SKU 4095

PRODUCT SPECIFICATIONS

ITEM
6 Positions / 0-2300 SPM (Strokes Per Minute)
1-3/16"
0-15°
Pin Type
1/2" Standard Shank
16-1/2"L x 3-1/4"W x 5-3/4"H
6.70 Pounds
SAVE THIS MANUAL

GENERAL SAFETY RULES

electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS

WORK AREA

ELECTRICAL SAFETY

DESCRIPTION
E194601
PAGE 2