Adjusting The Volume; Using Pip And Pop - HANNspree T232 User Manual

Notes:
• The TV supports S-Video input in addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority
to S-Video when two signals are detected at the same time.
• AV5 appears on selected models only.

Adjusting the Volume

1
Press volume up to increase the volume.
2
Press volume down to decrease the volume.
3
Press mute to eliminate sound. The word "MUTE" appears on the
bottom right corner of the screen and sound is turned off.
4
Press mute again to restore the original volume.

Using PIP and POP

The TV features Picture-in-Picture (PIP) and Picture-outside-Picture (POP),
enabling you to view two sources at the same time. Follow these
instructions.
1
Turn on the TV and select a source
signal.
2
Press PIP/POP from the remote
control.
A picture-in-picture window appears on
the display, using the last selected
source signal for the PIP.
Note:
Refer to "PIP Operation Mode" on page 84 for information on which
sources are compatible with each other in PIP and POP mode.
36
MAIN - 07
MAIN - 07
PIP - 56