Aquasmart™ Controls; Easy Touch Controls, The Display Screen, Time To Go - Fisher & Paykel AquaSmart WL26C Installation Instructions And User Manual

AquaSmart™ controls
16
Easy touch controls
These smooth, easy clean buttons require only a gentle touch to activate. To scroll you need to
remove your finger to break contact and touch it again. Once you become accustomed to the
soft touch technology you will find it effortless to operate.
The display screen
The display screen allows you to view the available wash cycles and modify options. It provides
feedback on what your AquaSmart™ washer is doing and how long the wash has to go, to keep
you informed throughout the cycle. The screen will also display messages to help you with the
overall running of your washer.
Time to go
Your AquaSmart™ washer will display how many minutes the wash cycle has to go, so that you
can tell at a glance when your washing will be finished. Once AquaSmart™ has finished the filling
and sensing process, the time to go will be displayed. A progress bar is also displayed and will
move along as the cycle progresses. Please be aware that the flow rate of the water supply may
influence your cycle time.
High Efficiency mode
This button activates or deactivates the HIGH EFFICIENCY mode. The light
will be on when High Efficiency is selected, (please refer to High Efficiency
mode page 17). To select CONVENTIONAL mode simply press the High
Efficiency mode button and the light will turn off.
The High Efficiency symbol
is active.
Scroll
The SCROLL buttons allow you to scroll between the wash options.
Select
Use the SELECT key to confirm your selected option and the BACK key to
cancel.
CHOOSE
WASH
Regular
will appear on the screen when the mode