Replacing The Light Bulb; Normal Operating Sounds You May Hear; Transporting Your Wine Chiller - Fisher & Paykel RF51RCWX1 Installation Instructions And User Manual

Replacing the light bulb

To avoid electric shock, unplug your Wine Chiller before replacing the bulb.
1
Remove the light cover as illustrated (Fig. 7).
2
Unscrew the bulb and replace.
3
Bulb specification: 220-240V,15W,E14
Refit light cover.
4

Normal operating sounds you may hear

Running/boiling water, gurgling sounds or slight vibrations are the result of the refrigerant
ƒ
circulating through the cooling coils.
The thermostat control will click when it cycles on and off.
ƒ
Other sounds may be heard for the following reasons:
ƒ
– Cabinet not level.
– Floor uneven or weak.

Transporting your Wine Chiller

Always move the Wine Chiller vertically. Do not transport the product lying down as possible
ƒ
damage to the sealed system could occur.
Note:
After moving, wait for 30 minutes before plugging in the Wine Chiller.
Cleaning and maintenance
Light Cover
Fig 7. Removing the light cover
11
1
2