Assembly And Setup; Contents Of Carton; Hardware Pack - MTD Series A4 Operator's Manual

Assembly & Set-Up
3
Contents of Carton
One Lawn Mower
Two Wheels
One Bottle of Oil
± If Equipped
One Bolt-On Side Discharge Chute±
One Lawn Mower Operator's Manual
One Side Discharge Chute±
One Hardware Pack
One Engine Operator's Manual
HardwarePack
Group1
Group2 ±
Qty. 2
Qty. 2
L_._
Qty. 2
H
Qty. 2
f Used with Bolt-On Chute Only
RecommendedTools for Assembly
Adjustable wrench (I)
Assembly
NOTE:This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed in the accompanying
engine manual BEFORE operating your mower.
Handle
I. Remove any packing material which may be between
upper and lower handles.
a. Remove wing nuts and carriage bolts from handle
as shown in Figure 3-I. Do not loosen or remove
adjacent hex head screws.
F
\
Figure 3-1