Table of Contents
Advertisement
DRIVE BELT REMOVAL AND REPLACEMENT
(Model 380 Series)
you r_aed
O
replace a worn or broken drive belt, follow steps 1 though 30.
Step 1.
Disconnect the spark plug and ground it.
Step g,
Drain the fuel tank,
Step 3,
Remove rear hub caps and wheels.
Step 4.
Remove eight phillips head screws.
Step 5.
Tip mower back on its handle end block
securely.
Step 6.
Remove blade and blade adapter.
Step 7.
Remove three hex head screws holding
small baffle.
Step g,
Remove small baffle.
Step g.
Remove large baffle.
Small
Large Baffle
(Behind
W
_ "
_"
8
_p
10.
Loosen hex lock nut holding idler bearin
Step 11.
Using a pair of pliers, pull back and
belt keeper bracket from the slot on idler
pulley.
Step 12,
Slide the belt out from between the Belt
Keeper Bracket and the idler pulley.
Transmissiofl
Pulley
Belt_
Bracket
Idler Pulle_
Bracket
Idler Pulley
Bolt and /
Locknut
21
Advertisement
Table of Contents
