Contents Of Hardware Pack; Items Required For Assembly - Yard-Man 13A-325-402 Operator's Manual

Contents of Hardware Pack
INSTALLING THE BATTERY
-- --4 _ '_
Battery Hold U
°own Rods
_'_\,Wing Nut 711-0222A
712-0397
ATTACHING STEERING TUBE
Rex Screw
_$1/4-20 x 1.25
I'J 710-0958
_ <_--- Hex Lock Nut
1/4-20
712-0324
ATTACHING SIDE-
DISCHARGE CHUTE (_
AND MULCHING PLUG _'_
.Wing Nut 712-0397__(_
Pushnut Fastener F -
726-0271
Hex Screws
_'_ 1/4-20 x 2.75"-_+
710-0564
x375"
710-0825
ATTACHING STEERING SHAFT
_i_ _4._ Self-Tapping710.05991/4_20 thd. Screw
ATTACHING STEERING GEAR COVER
_ _ _ _ _4_____ _/_!0T_t! ping Screw
ATTACHING OPTIONAL HITCH PLATE
Hex Bolt _
5/16-18 x 0.75" ---,,-
710-0118
Hex Nut
LockWasher._/ _ _,_ 2-0267
736-0119
ATTACHING STEERING
WHEEL
Hex Lock Bolt
_5/16-18 x 1.00
_ _ 4"_ 710-0643
(_),_Belleville Washer
736-0242
ATTACHING SEAT ASSEMBLY
J_" 710-0870
ATTACHING CONTROLKNOBS
Truss Head Machine (i_
Screw 710-3217
Hex Nut 712-0142-_ _)
Control Knobs
731-1918
ATTACHING OPTIONAL BUMPER
HexBolt _ _
3/8-16 x 1.0"
710-0514_
GG -
Figure 2
Flange Lock Nut
3/8-16 thd.
712-0431
NOTE: Reference to front, rear, right or left hand side
of the mower is observed from the operating position.
Items Required For Assembly
1. Fresh Gasoline
2. 7/16" wrench or socket (2)
3. 1/2"socket (1)
4. 9/16" wrench or socket (1)
5. Phillips head screwdriver (1)
6. Flat head screwdriver (1)
IMPORTANT: This unit is shipped WITHOUT
GASOLINE in the engine. Be certain to service
engine with gasoline as instructed in the separate
engine manua/ before operating your mower.
All hardware necessary for assembling your
rider mower is included in the hardware pack.
See Figure 2 and get familiar with the
hardware before starting to assemble unit.
7