Download Print this page

MTD Styles C Operator's Manual page 14

Two-stage snow thrower styles c & d

Advertisement

Tire Pressure
Before operating, check tire pressure and reduce
pressure to between 15 psi and 20 psi.
NOTE:
If the tire pressure is not equal in both tires, the
unit may pull to one side or the other.
AugerControl
Refer to Auger Control T eston Page 11 to adjust the auger
control.
ChuteAssembly
The distance snow is thrown can be adjusted by
changing the angle of the chute assembly. To do so,
stop the engine by removing the ignition key and loosen
the plastic wing knob found on the left side of the chute
assembly. Pivot the chute upward or downward before
re-tightening the wing knob. See Figure 6.
Figure 6
14

Advertisement

loading

This manual is also suitable for:

Styles hStyles