One Touch Recording - Magnavox VRU364AT Owner's Manual

19
One Touch Recording
Remote Control
Use the CHAN-
NEL (Up/Down)
buttons or the
Number buttons to
select the channel
you want to
record.
Press the
REC(ord)/OTR
button repeatedly
until the desired
recording length
appears in the
upper left comer
of the screen.
\
qkO C_tAgCk *tlAe _i.me rer_tctirting ]'or art OTR oJ_ter the OTR has been set, press
the STATUS/EXIT button.
To change the recording length while an OTR is in progress, press the
REC(ord)/OTR button until the desired length appears on-screen.
• If you begin an OTR when a recording is paused, the OTR will begin.
• You can not pause recording (for example, during commercials) during an
OTR.
• If the preset time for a timer recording comes up during an OTR, the OTR
has priority.
The one touch recording (OTR) function
allows you to program an immediate timed
recording 30 minutes to four hours long
without setting the timer. Before you
begin, make sure:
• Channels have been programmed.
• The desired recording speed (SP, LP,
SLP) has been selected with the (Tape)
SPEED button.
• There is a tape in the VCR. Make sure
the tape's record tab is intact and the tape
is long enough to record the program(s).
OThe VCR is in VCR position.
Starting an OTR
Use the CHANNEL (Up/Down) buttons or
the Number buttons to select the channel
you want to record.
2
Press the REC(ord)/OTR button repeatedly
until the desired recording length (30 min-
utes to four hours) appears in the upper left
comer of the screen. Recording will begin
immediately.
Stopping an OTR
To stop an OTR before recording is fin-
ished, press the STOP button or the
POWER button. To cancel the OTR but
continue recording, press the
REC(ord)/OTR button until REC appears in
the upper left corner of the screen.