Connect Accessory Devices; Recorder (Vcr-Dvd+Rw) - Magnavox 37MF321D User Manual

There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to the TV.
AVI YPbPr, VIDEO and L/R Audio,
AV2 YPbPr, VIDEO and L/R Audio,
AV9 VIDEO, S-VIDEO, L/R Audio and Digital Audio out (SPDIF OUT)
SIDE VIDEO, S-VIDEO and L/R Audio, Headphone
SPEAKERS
HDMI
75n
_Don't insert any cable here. This area isfor repair center use only.
(_) c-
_j
AUDIOIN
.....
AV2 AV_ )
ANTENNA
__ 750
HDMI _
AW AV1
AV_
(_) L÷ R ÷VIDEO
OUT
Recorder (VCR-DVD+RW)
Note: Do not place your recorder too close to the TV screen. Some
recorders may be susceptible for signals From the display. Keep recorders
a minimum distance of 20" _rorn the screen.
i 0 Connect the RF Antenna or Cable TV cable (eventually through
an optional two-way signal splitter and/or Cable TV converter
box) (D to the RF IN socket of your
recorder.
0 Connect another RF cable 0 from the output OUT of your
recorder to the TV's CABLE/ANTENNA 75 (_
_ jack.
For better playback quality for stereo device only, also connect
the Video, Audio Left and Right (only for stereo devices) AV
cables_ to the VIDEO, AUDIO L and R input
jacks
of AV3.
if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable to the
S-VIDEO input
instead of connecting the recorder to the
VIDEO jack of AV3. S-Video does not provide audio, so audio
cables must still be connected to provide sound.
28