Advertisement
J
<
pip
hookup is possible with a
VCR and a Digital Video Disc
Player (or similar device).
b
First connect the
cabh
original
TV signal or Antenna signal to the
ANT IN jack on the back of the
VCR.
<_
Connect
OUT jack on
the ANT
the rear of the VCR to the ANT'A"
75 f2 input on the rear of the TV.
_
Connect the yellow Video
Cable from the VIDEO OUT jack
on the VCR to the VIDEO IN jack
on the TV (labeled VIDEO IN-2).
Then, connect the red and white
Audio Cables from the AUDIO OUT
jacks on the VCR to the AUDIO IN
jacks on the rear of the TV (labeled
AUDIO L & R/MONO IN-2).
<_
Connect a
yellow Video
second
Cable from the VIDEO OUT jack
on the Video Disc Player to the
VIDEO IN jack on the TV (labeled
VIDEO IN-I). Then, connect a sec-
ond set of red and white Audio
Cables from the AUDIO OUT jacks
on the Digital Video Disc Player to
the AUDIO IN jacks on the rear of
the TV (labeled AUDIO L &
R!MONO IN - 1).
Note: When selecting the PIP
SOURCE, the Digital Video Disc
Player will appear on the AV 1
channel, and the VCR will appear
on the AV 2 channel.
O
5OHM
)AXIAL
:ABE
REAR OF "IV
DVD (OR SIMILAR)
VCR
75 OHM
COAXIAL
CABLE
/
/
OUTSIDE UHF/VHF
'" "_4
ANTENNAOR
CABLE TV SIGNAL
AUDIO
CABLES
(REDAND
WHITE)
47
Advertisement
