GE Profile 24 CustomStyle Owner's Manual page 24

Insertingthe doorpanels.
[]
Install the Side Trim.
These pieces are rocked inside the tiesh fi)od door
handle.
Donot removetheprotectivefilm on the outsideof the
Side Trimuntil the Side Trimis installe_
Fit the bottom of the Side Trim under the Bottom
Trim as illusuated.
Hold tim Side Trim against tim fiont thce of tim
deco_vltor panels and fit the Side Trim under
the Top Trim. Make sure the Side Trim is fitted
correctly and that }_)uare satistied _dth the
appemance of all the paris beti)re pulling the
tape liner.
[]
Secure the Side Trim.
Place one hand between tim two pieces of tape liner
and hold the Side Trim firefly against tim panels
and the side ofthe door.
Pull tim top tape liner tap about 3" (80 ram),
pressing the uim xdth your hand as the adhesive
is exposed to the door. Then pull the bottom
tape liner down ab_)ut 3" (80 ram). Follow the tape
xdth your hand, pressing the trim adhesive against
the door.
Continue pulling the tape liner loose, alternating
between the top and bottom and pressing the Side
Trim against the door.
[] Remove the Protective Film From the Outside of the Side Trim.
24