GE Profile 24 CustomStyle Owner's Manual page 23

Insertingthe doorpanels.
[] Loosen the Top Trim on the Freezer and Fresh Food Doors.
Using a T-20 Torx driver, loosen the two s(rews
attad]ing tile Top Trim about l/4" (6 ram).
[]
Insert the Freezer Panel and Fresh Food Panel
I Jfl the Top Trim up l/4" (6 ram) and carefiflly
push the fleezer panel in until it slides into the slot
behind the door handle. Push the fillet panel
(required with some door panels) in behind the
decorator panel. Repeat tbr flesh rood panel.
If your model has a dispenser and/or a
Refleshment Center, this step only applies
to the top panels.
[] Insert the Bottom Panel (for models with a dispenser and/or a Refreshment Center)
Cmetiflly push the panel in until it slides into the
slot behind the door handle, l'ush the fillet panel
(required with some door panels) in behind the
decorator panel.
[] 77ghtenthe two screws on the Top Trimto 30 in-lbs torque.
Cut-Out
SideTrim
23