GE Profile 23 Owner's Manual And Installation page 25

Installation Instructions
rsl REMOVE THE REFRIGERATOR DOOR
(cont.)
r_ Lift the refrigerator door up and off the bottom
hinge.
If the refrigerator has o refreshment center,
one person should slowly lift the door up and
off the bottom hinge and the second person
should carefully guide the electrical lines
(harnesses) through the bottom hinge.
90 °
Refreshment Center Models Only
[] Set the door on o non-scratching surface with
the inside up.
[] REPLACING THE DOORS
To replace the doors, simply reverse
steps 3 through 8.
However, please note the following:
• When lowering the doors onto the bottom
hinges, make sure the second person
curefully guides the tube und harnesses
through the holes in the hinges.
• When connecting the wuter line, muke sure
you insert the tubing oll the wuy to the murk.
\
lark
• Do not pinch the tubing and harnesses when
placing the doors on the bottom hinges.
• When connecting the power line and the
electrical lines (refreshment center models
only), be sure that the connectors ore seated
together fully.
25