GE 25 Owner's Manual And Installation Instructions page 7

About the shelves and bins.
vvvvw.GEAppliances.com
Not all features are on all models.
1_ Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Snugger
!
Refrigerawr oil?
Freezer bit?
Large Bins
The larger refligerator door bins and
fl'eezer tilt-out door bins are ac!iustable.
To remove: iJfi the ti'ont oI the bin straight
up, then lilt up and out.
The snugger helps prevent
tipping, spilling
or sliding of small items stored on the door
shell Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
To replace or relocate: Engage the back side Donotblock
el the bi,, ix, the molded sui)poxts ot the
do(n: Then push down on the ti'ont of the
bin. Bin will lock in place.
SmallBms
To remove: lilt the fl'ont of the bin straight
up then out.
Toreplace: Position the bin above the
rectangular molded supports on the duet:
Then slide the bin down onto the support
to lock it in place.
CAUTION: O n
models with an ice
chuteinsidethetop
freezer doorbib,be
carefulwhenp/aclbg
itemsin thebib.
Makesurethat
itemsdo notblock
or fail into theice
chute.
Freezer tilt-out bit?
Press tab and pull shelf
forward to remove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind othe_. The
special edges are designed to hel I) prevent
spills fl'om dili)ping to lower shelves.
Toremove:
Slide the shell out until it reaches the stop,
then press down on the tab and slide the
shelf straight out.
To replace or relocate:
I,ine the shelf up Mth the suI)I)orts and
slide it into place. The shelf can be
reposifioned when the door is at 90 ° or
more. To reposition the shelf, slide the shelf
past the stops and angle downward. Slide
shelf down to the desired position, line up
with the supports and slide into place.
Make sure you push the shelves all the way back
in before you dose the door