Fisher & Paykel AeroSmart DE62T27C Installation Instructions And User Manual page 19

Exhaust venting
Use heavy metal exhaust duct.
Do not use a plastic exhaust duct.
Do not use thin metal foil exhaust duct.
Failure to do so can result in death or fire.
Read the exhaust section (pages 12 – 15) before installing the exhaust system to determine the
1
maximum allowable exhaust duct length.
Do not use sheet metal screws when assembling ducting. Always use suitable duct tape.
Never use plastic or thin metal foil flexible exhaust material.
The exhaust outlet is located close to the center of the rear of the dryer. Make sure you join the
2
exhaust duct to the dryer with duct tape only. This will prevent lint and dust from escaping from
the dryer and exhaust system.
13 7⁄8" (352 mm)
The exhaust vent can be routed up, down, left, right or straight out the back of the dryer.
3
Refer to diagram.
WARNING!
Exhaust outlet
Fig.15 Exhaust venting dimensions
Fig.16 Venting options
Installation instructions
Fire Hazard
13 1⁄8" (333 mm)
17
EN
Does not include
foot height