GE GFDN240 Owner's Manual page 67

Power
Press to "wake up" the display. If the display is active, press to put the dryer in the standby mode.
NOTE: Pressing POWER does not disconnect the appliance from the power supply.
GEAppliances.com
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
Sensor Cycles Description
COTTONS For cottons and most linens.
NORMAL/MIXED LOADS For loads consisting of cottons and poly-blends.
EASY CARE For wrinkle-free and permanent press items.
ACTIVE WEAR Clothing worn for active sports exercise and some casual wear. Fabrics include new
technology finishes and stretch fibers such as Spandex.
DELICATES For lingerie and special-core fabrics.
For small loads that ore needed in a hurry, such as sports or school uniforms. Con also be
SPEED DRY
used ifthe previous cycle left some items damp, such as collars or waistbands.
Timed Dry Cycles Description
WARM UP Provides 10 minutes of warming time to warm up clothes.
AIR FLUFF Use this feature to tumble items without heat.
DEWRINKLE For removing wrinkles from items that ore dry or slightly damp. This cycle is not
(on some models) recommended for delicate fabrics.
STEAM REFRESH
(on some models)
For slightly wrinkled dry garments. Significantly reduces wrinkles on up to 5 garments.
After the STEAM REFRESH Cycle, the unit will beep and display "0:00." If the unit is not
turned off or if the door is not opened, the dryer will continue to tumble for 30 minutes. At
the end of 30 minutes, it will display "0:00" and the cycle will be complete.
Note: A single extremely light fabric item may need to have on additional item included
in the STEAM REFRESHcycle to achieve optimum results.
STEAM DEWRINKLE For use with lurger loads than STEAM REFRESH.Ideal for loads left in dryer for an
(on some models) extended time.
Ply Cycle Description
MY CYCLE Press to use, create or modify custom dry cycles. (See page 8 for more details)
Timed Dry
Use to set your own dry time. TIMED DRY is also recommended for small loads
To use TIMED DRY:
1. Turn dry cycle dial to TIMED DRY.
2. Increase the drying time by pressing the TIMEDRYADJUST 4" button.
Note: This button only increases the time. When max time is reached, pressing the button again will reset the counter
to the lowest setting.
3. Select the TEMP.
4. Close the door.
5. Press Start