About The Shelves And Bins - GE GTH18DCDBRBB Owner's Manual And Installation Instructions

Top-freezer refrigerators
Table of Contents

Advertisement

Available languages

Available languages

About the shelves and bins.
GEApplia.ces.com
Not all features
are on all models.
Rearranging
the Shelves
Refrigerator
Compartment
Toremove:
0
0
Tilt the shelf up at the front.
',
'
0
hift the shelf up at the back
and bringthe shelfout.
Some models
have wire shelves
]1
_,_'_L_
_
-_
that can be acJjusted in the same
fylalW_er.
To replace:
-'_fl
_"'_-
0
While tilting the shelf up, insert the
top hook at the back of the shelf in
_.
a slot on the track.
_0
ower the front of the shelf until the
bottom of the shelf locks into place,
Freezer Compartment
Toremove:
L::: i::i::i:: I :L
_
Lift and slide left,
o o
Rotate up and out.
Toreplace:
o
Holding the shelf diagonally,
insert the left end of the shelf
into the center of the shelf
supports on the side wall,
Insert the right end of the shelf
into the shelf supports on the
side wall, Resteach end of the
shelf on the bottom of the
shelf supports,
Front bar
Slide- Out Spillproof
Shelf (on
some models)
The slide-out spillproof shelf allows you to reach
items stored behind others, The special edges are
designed to help prevent spills from dripping to
lower shelves,
NOTE."Theshelves are shipped with tape on the
back. Remove this tape before attempting to
remove the shelf.
Toremove:
Remove all items from shelf,
Slide the shelf out until it stops,
Lift the front edge of the shelf until the tabs
are above the shelf frame,
Continue pulling the shelf forward until it can
be lifted out and removed,
Toreplace:
Placethe rear of the shelf on the shelf frame
.just behind the front bar,
Slide the shelf back until the tabs are above
the openings,
Lower the shelf so that the tabs go into the
openings; then slide the shelf all the way in,
Make sure thot the shelf sits flat ofter re/nstallat/on
and doesn't move freely from ,sideto side.
Make sureyou push the shelves all the way in
befom you close the dooL
Adjustable
Bins on the Door
(on
some models)
Adjustable bins can easily be carried from refrigerator to work area.
Toremove:
Toreplace or relocate:
Lift bin straight up; then pull out.
Engage the bin in the molded supports of the door
and push down. Bin will lock in place.
NOTE." Bins for the refrigerator
and freezer doors are different
sizes and are not interchangeable,
[:
_
: :
:!:
¸
Non-Adjustable
Shelves
on the Door
Detachable shelves deepen and enclose fixed door
shelves,providing more storage room and greater
storage flexibility.
To remove:
Lift the shelf straight up; then pull out.
Toreplace:
Engage the shelf extender in the molded supports
on the door and push down. It will lock in place.
Freezer
Tilt-Out
Bin fon.some modd.s)
Pushthe button as you tilt out the bin,
Toremove: Hold the sides of the bin and lift it
straight up; then pull out,
Toreplace: Engage the ends of the bin in the
molded supports on the door and push down. It
will lock in place.
NOTE." D o not overload the bin.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gth18ibdbrbbGth18ibdbrww

Table of Contents