Sensor Beverage; Sensor Popcorn - GE JEB1095 Use And Care Manual

SENSOR POPCORN
NOTE: Do NOT use the metal shelf with the
Sensor Popcorn program.
NOTE: Do not use this feature twice in
succession on the same food portionJit may
result in severely overcooked or burnt food.
The Sensor Popcorn feature is designed to be used
only with prepackaged microwave popcorn weighing
3.0 to 3.5 ounces.
Step 1: Remove the outer wrapper from the
microwave popcorn.
Step 2: Open oven door and place package of
popcorn in the center of the oven floor as directed
by the package instructions. Close oven door.
SENSOR] Step 3: Touch SENSOR POPCORN pad.
No need to touch START, the oven will
start immediately.
After the popcorn sensor
detects steam, the oven
signals and displays
remaining cooking
time needed.
• primo,,
• .,,,= "----, POWER
COOK
TIME
-
d
,'._- m
Step 4: When cooking
is completed, the oven
signals and flashes
"End". Open the door
and remove the popcorn.
If food is undercooked after the countdown use
MICRO COOK for additional cooking time.
How to Adjust the Sensor Popcorn Program to
If your favorite popcorn is not completely popped,
there is a simple adjustment you can make.
Touch the SENSOR
POPCORN pad.
(The oven will start
immediately.) Then
touch number pad 9.
A plus sign will appear
pnp÷
LI
Provide a Shorter or Longer Cook Time
If your favorite popcorn is overcooked, there is a
simple adjustment you can make.
Touch the SENSOR
POPCORN pad.
(The oven will start
immediately.) Then
touch number pad 1.
A minus sign will appear
n p _
LI
on the display beside the word "POP". The plus sign
indicates 20 seconds more cooking time is being
provided.
Questions and Answers
Q. I opened the door to check on the popcorn and
"Error" appeared on the display. Why?
A. The Sensor Popcorn program first detects steam and
then switches to Micro Cook. If you open the door
while "POP" is displayed, "Error" will appear. Close
the door, touch CLEAR!OFF and begin again. You
may open the door when "End" appears on display.
on the display beside the word "POP". The minus
sign indicates 20 seconds less cooking time is being
provided.
Q. Can I use regular popcorn with the Sensor
Popcorn feature in my microwave oven?
A. No. This automatic function is designed to be used
only with prepackaged microwave popcorn.
Q. When I touched the POPCORN pad, the oven
signalled and "HOT" appeared in the display,
and the feature would not operate. Why?
A. If the temperature inside the oven is greater than
200 °, the sensor will not operate properly as the oven
does not allow the sensor cooking feature to be used.
SENSOR BEVERAGE
NOTE: Do not use this feature twice in succession
on the same food portionJit may result in
severely overcooked or burnt food.
The Sensor Beverage program makes it simple to
heat a cup of hot chocolate or other beverage. Use a
cup that has no metal decoration and is microwave-
safe (refer to the Microwaving Tips section).
.............................................. Touch SENSOR BEVERAGE pad.
SENSOR No need to touch START, the oven
BEVERAGE
............... _. ................ will start immediately.
The oven will signal and turn off automatically
when finished.
CAUTION: Beverages heated with the Sensor
Beverage featnre may be qnite hot. Remove the
container with care.
If food is undercooked after the countdown use
MICRO COOK for additional cooking time.
19