GE Appliances DVM1950 Owner's Manual page 31

Before you
coilfor
service ....
Troubleshooting Tips
Savetime and money! Reviewthe charts on the following pages first and you may
not need to call for service.
i
Possible Cause
A fuse in your home may be
blown or the circuit breaker
tripped.
Power surge.
What To Do
• Replace fuse or reset circuit breaker.
• Unplug the microwave oven, then plug
it back in.
Plug not fully inserted into • Make sure the 3-prong plug on the
wall outlet oven is fully inserted into wall outlet.
Door not securely closed. • Open the door and close securely.
Power Saver IEnergy Saver} • Push the Power Saver (Energy Saver)
button not engaged, button so it is pressed in.
Door not s ecurely c osed. • Open the door and d ose s ecurely
i_d, _ _ _ _il!
START/PAUSEbutton not • Press START/PAUSE.
selection,pressed after entering cooking
• Press CANCEL/OFF. Another selection entered
already in oven and CANCEL/
OFF button not pressed to
cancel it.
Cooking time not entered • Make sure you have entered cooking
after pressing TIME COOK time after pressing TIME COOK.
CANCEL/OFF was pressed • Reset cooking program and press
accidentally. START/PAUSE.
Food weight not entered after • Make sure you have entered food
selecting AUTO DEFROSTor 1 weight after selecting AUTO DEFROST
Ib QUICK DEFROST. or FASTDEFROST.
Food type not entered after • Make sure you have entered a food
pressing AUTO COOK. type.
The control has been locked. • Press and hold CANCEL/OFF for about
5 seconds to unlock the control.
The cooktop light is located • This is normal.
below the oven floor. When
light is on, the heat it
produces may make the oven
floor get warm.
You have tried to change the • Many of the oven's features are preset
power level when it is not and cannot be changed.
allowed
51