Power Levels - GE Appliances DVM1950 Owner's Manual

About the sensor microwave features.
I
Cook
]
i Express Cook 1
1 2 3
4 5 6
7 8 9
0
Start
Pause 1
Changing the Power Level
The power level may be entered or changed
after entering the time for Time Cook.
ill press TIMECOOK button once.
[] Enter cooking time.
[] Enter POWERLEVELwhen prompted.
I_1 PressSTART.
Variable power levels add flexibility to
microwave cooking. The power levels on the
microwave oven can be compared to the
surface units on a range. Eachpower level gives
you microwave energy a certain percent of the
time. Power level 7 is microwave energy 70%
of the time. Power level 3 is energy 30% of the
time. Most cooking will be done on High (power
level 10)which gives you 100% power. Power
level 10 will cook faster but food may need
more frequent stirring, rotating or turning over.
A lower setting will cook more evenly and need
less stirring or rotating of the food. Some foods
may have better flavor, texture or appearance
if one of the lower settings is used. Usea lower
power level when cooking foods that have
a tendency to boil over, such as scalloped
potatoes.
Rest periods (when the microwave energy
cycles off) give time for the food to "equalize"
or transfer heat to the inside of the food. An
example of this is shown with power level 3-
the defrost cycle. If microwave energy did not
cycle off, the outside of the food would cook
before the inside was defrosted.
Here are some examples of uses for various
power levels:
High 10: Fish,bacon, vegetables, boiling liquids.
Meal-High 7: Gentle cooking of meat and
poultry; baking casseroles and reheating.
Medium 5: Slow cooking and tenderizing for
stews and lesstender cuts of meat.
Low2 or 3: Defrosting; simmering; delicate
sauces.
Warm 1: Keeping food warm; softening butter.
NOTE: Youcan also change the power level
during many cooking modes by pressing the
power level button entering a valid power level.
21