GE Monogram Owner's Manual page 17

Automatic Icemaker
Stainless Steel Refrigerator
Automatic
icemaker
NOTE- A newly installed refrigerator may take 12 to 24 hours to begin making ice.
The icemaker will produce seven cubes
per cgcle-approximatelg 100-130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other use
conditions.
See below for how to access ice and reach
the power switch.
If the refrigerator is operated before
the water connection is made to the icemaker,
set the power switch in the O (off) position.
When the refrigerator has been connected
to the water supplg, set the power switch
to the I (on) position. The icemaker power light
will turn green when the freezer light switch is
pressed in or when the freezer door is closed.
The icemaker will fill with water when it cools to
15°F (-10°O. A newlg installed refrigerator mag
take 12 to 2/4hours to begin making ice cubes.
You will hear a buzzing sound each time
the icemaker fills with water.
Throw awag the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
Power
Switch
X; Icemaker
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice. It is normal
for several cubes to be joined together.
If ice is not used frequentlg, old ice cubes will
become cloudg, taste stale and shrink.
NOTE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle
multiple times when making one batch of ice.
NOTE: Set the power switch to the 0 (off) position
if the water supply is shut off
Accessing ice
and reaching
the power
switch
To reach the icemaker power switch, open the top
freezer drawer and remove the full-width basket.
Alwags be sure to replace the basket.
To access ice, open the bottom freezer drawer.
The ice bucket is located below the mullion. Pull it
forward to access ice.
Ice _-_r
Mullion
To reach the power switch.
Toaccessice.
17