Preparing In Install The Air Conditioner - GE Appliances AG_18 Owner's Manual And Installation Instructions

Preparing to install the air conditioner.
Read these instructions completely and carefully.
Before You
NOTE TOINSTALLER:Leave these instructions with
the air conditioner after installation is completed.
NOTE TOCONSUMER:Keep this Owner's Manual
and Installation Instructions for future use.
IMPORTANT NOTES:
For personal safe_ this air conditioner must be
properly grounded.
It is important to have the wall outlet and circuit
checked by a qualified electrician if there is any
doubt as to whether a proper ground exists.
Follow National Electric Codes (NEC) and/or local
codes and ordinances.
CAUTIOn:
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power cord
of this air conditioner.
Aluminum house wiring may present
special problems--consult a quaflfied
electrician.
Some models require 115/120-voh a.c.,
60 Hz grounded outlet protected with
a 15-amp time delay fi_se or dr_uit breaker.
The 3-prong grounding plug minimizes the
possibili/y of electric shock hazard. If the w_dl outlet
y,)u plan to use is only a 2-prong outlet, it is y,)ur
responsibili/y to have it replaced with a properly
grounded 3-prong wall outlet.
Some models require 230/208-voh a.c.,
prote_ ted _dtll a time delay fl_se or dr_uit
breaker. These models should be installed
on their own single brandl cir(uit fi)r best
performance and to prevent overloading
house or ap_ntment wiring (ir(uits, whi(h
(ouM cause a possible fire hazard fiom
(n,erheating _dres.
Tools YouWillNeed
_:;_ l 'hillips-head s( rewdfiver
_'; Fla/-blade screw&iver
i_?Ruler or/ape measure
>: Sdssors or knite
Pencil
i_?I,evel
i;_? Hammer